Media-sat portal Home Page FAQ Team Search
  Registracija
Prijava 
Neodgovoreni postovi Aktivne teme  

Izbriši sve kolačiće



New Topic Post Reply  [ 1 post ] 
 
Prethodna tema | Sljedeća tema 
Autor Poruka
Izvan mreže 
PostPostano: 23 vel 2014, 14:45 
Avatar

Pridružen: 05 lip 2012, 08:23
Postovi: 527
Lokacija: kod kuće većinom
Datih hvala: 217 puta
Primljenih hvala: 206 puta
Instructions: Update with USB stick
Format to prepare the USB stick in FAT32 (if it is not already >>> Note: Win7 makes it probs!)
and on the USB flash drive create a folder called "xpeedlx" (lower case sensitive)

Download and unzip the image package.
The package consists of several files:

Citat:
rootfs.bin
kernel.bin
splash.bin
noforce
imageversion


The unzipped files are now on the update vorbereitenen stick in the folder "xpeedlx" Copy (pay attention to total copying, eject stick is best)

Flash Instructions:
- Switch off the back of the box toggle switch
-> Go to this jumps up once you get into the middle on top of it pushes> Do not pull the front cover!
- Update infect stick best front to the USB port
- Switch the toggle switch
- It should now display a message through the scroll> press arrow up to upgrade!
- Now press the + button behind the front flap
- The box flashes now automatically takes about 3 - 5 minutes
- The box should then automatically reboot
- USB-stick can now be removed

Kod:
Ukratko na našem, usb formatirati u fat32 ( win7 i win8 znaju praviti problem , nekad neće usb da radi kako spada prilikom flešanja )
image koji ste skinuli raspakovati i folder xpeedlx ( u njemu se nalazi 5 gore navedenih file-ova ) prebaciti na usb, zatim ugasiti resiver ubaciti usb i uključiti resiver na displeju pratite , kada vam kaže da pritisnete strelicu gore, vi stisnete + tipku be resiveru, i flešanje kreće...



A evo i druge opcije jer nekada neće kako gore piše

If the image package instead of the file "noforce" a file called "force" is present, so the update is done automatically after switching on, without simultaneously pressing the + button.

Kod:
Znači u raspakovanom image-u unutar foldera xpeedlx preimenujete file "noforce" u "force" , i onda folder xpeedlx ubacite u usb.
Tada će vam nakon uključenja resivera flešanja image-a krenuti odma, nema potrebe za pritisknajem one + tipke.
Malo jednostavnije i brže...


Video upustvo



xpeed lx2
dm800hd sim 2.01
coship ttv
ue40es5500
LeTV 1s x500

Victoria Concordia Crescit
Forza Ferrari! Sempre Ferrari!


Vrh
 Profil  
 
Traži:
Prikaži postove “stare”:  Redanje  
New Topic Post Reply  [ 1 post ] 


Na mreži

Trenutno korisnika: / i 1 gost.


Ne možeš započinjati nove teme.
Ne možeš odgovarati na postove.
Ne možeš uređivati svoje postove.
Ne možeš izbrisati svoje postove.
Ne možeš postati privitke.
Forum(o)Bir:  

cron
Powered by Media-sat Team © Media-sat Forum
phpbb.com.hr