Description of how "close" the bad sectors in the Dreambox-ie to flash image browser where we have no rs232 port on the computer.

1: DM800 OFF.
2: We press on the chassis power / plug while the power / procedure how to upload image ... /
3: STOP - DHCP - IP in the display ...
4: Start>> Run>> telnet [ip Dreambox]>> Enter
5: We're in the BIOS of our Dreambox.
6: Set the picture as that is an option Flash Sector Recovery to enabled
7: Then go to the last tab, "Exit" and save settings / important without rebooting the tuner /
8: The next steps are the same as when uploading image by the browser, it will have the additional error enabled "bad sector recovery enabled"
9: Or, another message / messages when you find bad sectors in a flash they will be "closed" as we are notified.
10: After uploading the image we do "reboot" and we already have plenty of smooth image.

Preneseno sa jednog sat foruma.