Unos Image u DreamBox 500HD sa Mini USB kabelom - Tutorial
1. Mini USB male to male USB & Cat5 Network Cable 16225260.jpg
2. Universal DreamUP App.
Processing:
1. Unplugged the DreamBox 500HD 2. We connect the cable for its part Mini USB port and "Service" of the DreamBox 500HD and the USB to a USB port on your PC and also the LAN Cable from your Router. 3. Just plug it in, the PC will detect new hardware connected to the system 4. The PC will ask the driver for this new component, Windows 7 will download the driver Auto 5. Open the Windows Device Manager, and you will see the new Hardware installed, will appear as COM port ( even a USB cable ). In the following example, is recognized as the cable into the port COM4. 47870490.jpg
6. We opened the Universal DreamUP App. and select the update COM port ( like any other model of DreamBox ). At this point, we choose the COM port that we appeared in the previous step ( COM4 in this example ). 7. Press the Connect button the DreamUP Universal and we can turn the DreamBox 500HD to start loading new firmware.
So there are the Two ways to flash the Receiver, and Yes a Previous Copy of E2 Channel List is the best way to upload the Channel List, or you will have to scan each one Independantly.
Prenešeno sa jednog sat foruma.
Pažnja! Nemaš dopuštenje kao gost foruma za pregledavanje i/ili preuzimanje privit(a)ka dodan(og)ih postu.
|