USB sam formatirao na fat32, kad ga stavim u rec, i idem na inicijaciju on mi da error... i to 3 sticka sam probao... error je
root@dm800:~# sfdisk -l
Disk /dev/sda: 1020 cylinders, 247 heads, 62 sectors/track sfdisk: Warning: The partition table looks like it was made for C/H/S=*/255/63 (instead of 1020/247/62). For this listing I'll assume that geometry.
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System /dev/sda1 0+ 972- 973- 7815167 b W95 FAT32 sfdisk: start: (c,h,s) expected (0,0,3) found (1023,254,63)
sfdisk: end: (c,h,s) expected (972,240,36) found (1023,254,63)
/dev/sda2 0 - 0 0 0 Empty /dev/sda3 0 - 0 0 0 Empty /dev/sda4 0 - 0 0 0 Empty root@dm800:~# mkfs.ext3 /dev/sda1 mke2fs 1.42.6 (21-Sep-2012) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 488640 inodes, 1953791 blocks 97689 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=2000683008 60 block groups 32768 blocks per group, 32768 fragments per group 8144 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Allocating group tables: done Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done
i imam ga u dreamboxu ali imam npr 10 mb...
ja mislim da je ovo problem, iako se ja ne razumijem u linux, znaci veze s vezom...
sfdisk: start: (c,h,s) expected (0,0,3) found (1023,254,63)
sfdisk: end: (c,h,s) expected (972,240,36) found (1023,254,63)
pomoc bi mi dobro dosla...
radi se o DM800HD
|