Update: 21-02-2012, Boblight 0.6R5

- Fixed, network support
- Fixed ipaddress input to ConfigIp
- Added some OpenMP pragma's
- Optimize startup
- Reconnect if lost connection
- Changed active status to connection status


Thx speedyisfast

Boblight 0.6R7

Update: 03-03-2013, Boblight 0.6R7
- Live update feature removed, there were many problems with enigma2 (reboots, crashes and high cpu usage)
- Gui updated
- Added 7 custom profiles
- Added Raspberry Pi support (not tested, create boblight.conf by yourself)
- Installer makes backup from profiles and configfile.

Thx speedyisfast

Boblight 0.6R8

Update 06-03-2013, Boblight 0.6R8
- Live update feature back !!, now it talks over a socket connection

Thx speedyisfast

Boblight 0.6R10

Update 11-03-2013, Boblight 0.6R10
- Fixed, memoryleak in boblightd

Update 10-03-2013, Boblight 0.6R9
- Optimized daemon, use now 10-14% cpu instead of 25-30% (thanks to heven)
- Creator updated to make names of 3 chars
- Changed installer, makes now a backup from profiles
- Socket conn. changed to UNIX for faster communication
- Sedu Prefix changed in creator.
- Fixed error in bluebutton menu.

I have tested the sedu protocol on 2 boxes, dm8000 is ok and dm800 is ok

Don't foget to change the names (you can use the creator) in your boblight.conf, the light names must be 3 chars XX1 , XX2 or 001, 002 others daemon will not work.

For all members who have a delay at some resolutions.
Open a terminal and start boblight with:

boblight-enigma2 -t 5 -k -d (change 5 in your number)

-t means the delaynumber, with this we can test what number we need for the resolution.
-k is the grab info, this gives also the ofs and ofs2.
-h is help

If you have found a resolution with a good delay, please post it.
To built in this, i need this info:

- The tv channel, ofs+ofs2 (-k), resolution (-d), VideoFPS (-d), and the delaynr

Thx speedyisfast

Boblight 0.6R11

Update 12-03-2013, Boblight 0.6R11
- Added a option to force the automatic delay
- Changed interval, now possible from 0.01 to 0.50, 0.01 is fastest
- Added some prefixes for seduboard A0 = 96 channels A1 = 256 channels A2 = 512 channels B0 = 768 or more
- Added a ledslayout in creatormenu (is not ready for now)
- Fixed atmolight device, atmolight need to start at channel 4
- Added Vertical and Horizontal blockdepth

Don't foget to change the names (you can use the creator) in your boblight.conf, the light names must be 3 chars XX1 , XX2 or 001, 002 others daemon will not work.