CFE Image for VU+ solo and duo
The CFE image of Vu+ Solo

The main difference from the old one is supporting the large size image more than 48MB.
Please see the detailed explanation of update as below.

1) Unzip the solo_cfe_2.0_usb.zip to USB stick. (There should be /vuplus/solo/cfe_cfe_auto.bin)
2) Insert USB stick into the USB port of solo and power on the box.
3) It takes just a few secs to update.
4) If solo's front led blinks continuously, restart box.
5) To proceed with image update, you should delete the cfe_cfe_auto.bin at /vuplus/solo in USB stick once bootloader update is finished.
_____________________________________________________

The CFE image of Vu+ duo cfe Rev 3.0

HowTo updating bootloader:

download attached file
unzip attached file
format USB flash drive in with fat
create directory /vuplus/duo at flash drive
copy file to directoy /vuplus/duo at flash drive
shutdown VU+ STB
disconnect all USB devices
connect USB flash drive to VU+ STB
power on VU+ STB
wait for message "Please remove USB" at VFD
disconnect USB flash drive
power off VU+ STB
flash new image











THX an @plnick


P.S: Ovaj image ide samo na USB i služi da resiver može prepoznati USB , pošto se u nekim slučajevima zna desiti da resiver ne vidi USB , ili da je recimo proces ranije isključen pa resiver zaglavi.Nakon ubacivanja usb-a sa ovim image-om i restarta OBAVEZNO ubacite odgovarajući image ponovo u vaš Vu resiver